Retractable/Telescopic Anti Ram Raid Bollards and Posts


Rhino Telescopic bollards provide a secure, simple and cost effective method of protecting premises and vehicles. Rhino posts can be located in forecourts, car parks or shop fronts to provide excellent levels of protection.

Fully retractable bollards can be lifted out of the ground in seconds and lowered just as easily. The bollards lock into their upright position with an integral high security push button lock. When the posts are not required, they simply slide into their host tube below ground and the steel flap is closed flush. As a result of the continuing trend towards products offering maximum protection and security, Rhino now offer their reinforced anti-ram specification as standard throughout the entire commercial telescopic bollard range.

For applications which do not require this level of security, non reinforced equivalents are available. Coordinating static posts are also available on request. Selected retractable bollards are now available with a lift assist mechanism. Lift assisted bollards are fitted with an internal gas spring, which helps to reduce the operating weight by approximately 70%. The mechanism enables the bollards to be lifted effortlessly into place and gently lowered with a smooth, cushioned descent.

The Rhino gas spring and surrounding body is manufactured from a grade 316L stainless steel, meaning that it will not rust or corrode, thus minimising ongoing maintenance costs. Rhino telescopic bollards are manufactured using an automated robot welding process for greater precision and accuracy. Our products are quality checked at each stage of manufacture to ensure they are always of the highest quality.


Specification

Rhino Telescopic Bollards are available in steel, stainless steel and polyurethane:

Steel:

Bollards can be supplied in a galvanised or powder coated finish. All steel products are hot dip galvanised to BS EN ISO 1461 (1999). Powder coating is available in most RAL or British Standard colours.

Stainless Steel:

Bollards are manufactured in high quality grade 316 (1.4401) austenitic steel for maximised durability.


Polyurethane:

Bollards are made from Ferrocast, Marshalls’ two part polymer set around an internal steel core. Polyurethane bollards can also be supplied in a full range of colours.


Installation, maintenance and replacement components
Full Installation:

Available on selected schemes.


Repair or Full Service:

Option available for all products.



Locks and Keys
Master Key Facilities:

Locks can be keyed alike or to differ.


Anti-tamper locking mechanism:

Selected bollards feature a 10 pin ‘anti-drill’ push button lock.


Overnight Service:

Replacement of lost keys.



Sold Secure

The Sold Secure organisation is dedicated to reducing the risk of crime through assessing the performance of security products. Established in 1992 by Northumbria and Essex Police with the backing of the Home Office, Sold Secure is now administered by the Master Locksmiths Association.

Selected telescopic bollards have been independently tested and certified by Sold Secure to the ‘Automotive Gold’ standard and are suitable for inclusion in the Sold Secure Approved Category List.

The accreditation is awarded in reference to the Rhino 10 pin ‘anti-drill’ push button locking mechanism, which is used on selected bollards throughout the telescopic bollard range.

Secured by Design

Secured by Design is a UK Police Flagship initiative, supporting the principles of designing out crime, crime prevention and security standards for a range of applications.

Managed by the association of Chief Police Officers Crime Prevention Initiatives (ACPO CPI), Secured by Design guarantees police approval of accredited security products. Marshalls Street Furniture is a Secured by Design Accredited Organisation.

Telescopic Anti Ram Raid Bollards and Posts

Designed predominantly for domestic applications, Rhino domestic telescopic bollards are ideal for driveway installations to restrict access to properties and protect parked vehicles.

RT RD4
  • A round telescopic bollard which locks securely into place with a 500mm height above ground and features a 76mm diameter.
  • Manufactured from mild steel to BS 1440, it is galvanised to BS EN ISO 1461 (1999) providing increased resistance to rust and corrosion.
  • The RT RD4 is supplied polyester powder coated in either RAL Black 9005 or Yellow 1021 as standard. Other RAL colours are also available on request.
  • A round telescopic bollard manufactured from a carefully selected grade of 316L (1.4401) stainless steel.
  • Exceptionally strong and requiring little maintenance, the RT RD4 SS offers a secure, durable and contemporary solution for domestic applications.
  • The RT RD4 SS is 500mm high when extended above ground and has a 76mm diameter.
  • A coordinating static post is also available (Ref: RS001 D4).
RT RD4 SS
  • A round telescopic bollard manufactured from a carefully selected grade of 316L (1.4401) stainless steel.
  • Exceptionally strong and requiring little maintenance, the RT RD4 SS offers a secure, durable and contemporary solution for domestic applications.
  • The RT RD4 SS is 500mm high when extended above ground and has a 76mm diameter.
  • The RT RD4 SS is 500mm high when extended above ground and has a 76mm diameter.

RT RD4

RT RD4 SS


Rhino commercial telescopic bollards are supplied with our heavy duty specification as standard, making them ideal for anti ram raid applications. For applications requiring a lower level of security, non reinforced bollards are also available.

The RT R8 HD and RT SQ8 HD are manufactured from mild steel to BS 1440 and are galvanised to BS EN ISO 1461 (1999). Designed for commercial usage, the bollards are ideal for providing ram raid protection to garage forecourts, driveways and pedestrian zones, town centres and commercial entrances. The bollards feature a 10 pin ‘anti-drill’ push button lock for added security.

RT R8 HD
  • A round telescopic bollard with a height above ground of 670mm and a 90mm diameter.
  • The bollard is reinforced with a high strength inner post sleeve, manufactured from 76.1mm x 2mm steel, for increased performance on impact.
  • A non reinforced option (Ref: RT R5) is available on request for lower risk applications. A coordinating static post is also available (Ref: RSP R8).
RT SQ8 HD
  • A square telescopic bollard with a height of 670mm and a 90mm x 90mm width.
  • As with the RT R8 HD, the SQ8 HD is reinforced with an inner post sleeve for added impact performance.
  • A non reinforced option (Ref: RT SQ5) is available on request for lower risk applications. A matching static post is also available (RSP SQ8).

RT R8 HD

RT SQ8 HD


RT SS5
  • A round telescopic bollard manufactured from grade 316L (1.4401) stainless steel.
  • The bollard rises to 710mm above ground and features a 101mm diameter.
  • Supplied with a brushed satin finish, the exceptionally strong stainless steel outer is 2mm thick and is reinforced with a 90mm x 5mm steel internal post sleeve for added performance.
  • A coordinating post (SSB01) is available on request.
  • The RT SS5 features a 10 pin push button lock for added security.
RT SS5

RT SS5

RT SS5 Lift Assist
  • The RT SS5 is available with an internal lift assist mechanism to significantly reduce the operating weight and aid manual handling.
  • The bollard is fitted with an internal gas spring, which reduces the lifting weight to around one third of that of its standard equivalent.
  • The Rhino gas spring is manufactured from stainless steel, which means that it will not rust or corrode like some steel equivalents, thus minimising ongoing maintenance costs.
RT 114/670 HD
  • A round telescopic bollard manufactured from high strength mild steel to BS 1440 and galvanised to BS EN ISO 1461 (1999).
  • The bollard locks into place 670mm above ground and features a larger 114mm diameter.
  • Features a 10 pin ‘anti drill’ push button lock for added security.
  • The RT 114/670 HD is reinforced with a 101mm x 4mm steel inner post sleeve for enhanced performance on impact, making the bollard ideal for high risk anti ram applications.
  • Supplied galvanised as standard, the RT 114/670 HD can be polyester powder coated to a RAL colour of your choice.
RT 114/670 HD Lift Assist
  • The RT 114/670 HD is available with an internal lift assist mechanism to substantially reduce the operating weight and aid manual handling.
  • This stainless steel gas spring reduces the lifting weight by approximately 70%, from 22.5kg to around 6-7kg.

RT R14 HD
  • A round telescopic bollard manufactured from high strength mild steel to BS 1440 and galvanised to BS EN ISO 1461 (1999).
  • The RT R14 HD has a height above ground of 850mm and diameter of 114mm.
  • Features a 10 pin ‘anti drill’ push button lock for added security.
  • The bollard is reinforced as standard with a 101 x 4mm internal post sleeve for added strength and security, making it the ideal choice for anti ram applications.
  • A non reinforced option is also available for applications of lower risk (Ref: RT R14). A coordinating static post (Ref: RB 114) is available on request.
RT R14 HD Lift Assist
  • The RT R14 HD is now available with a lift assist mechanism. This enables the specification of a telescopic bollard of significant size and operating weight, whilst reducing the lifting weight by approximately 70%, enabling effortless functionality.
  • The internal gas spring reduces the operating weight from 26.5kg to around 7kg.

RT SU5 SUNDERLAND TELESCOPIC BOLLARD (FERROCAST)

The RT SU5 Sunderland bollard is a telescopic post manufactured from Ferrocast Polyurethane. The bollard rises to 730mm above ground and has a 135mm diameter. A coordinating static bollard (Sunderland Low) is also available.

Ferrocast bollards are manufactured from high quality polyurethane and cast around an internal steel core for increased strength. The strong, non ferrous exterior ensures that the bollards will not rust or corrode, thus minimising ongoing maintenance costs.


Banding Options

    Rhino commercial telescopic bollards are available with a choice of three standard banding options:

  • Single Band: A single recessed 100mm band supplied with Class 2 reflective tape. Available in either one or two colours.
  • Double Band: Two recessed bands supplied with Class 2 reflective tape.
  • Hazard Banding: For increased visibility and safety. Banding is available in three standard colours; amber, red and white. For additional options, please contact our sales office.


Security Options

Square security cover - To add further security to your bollard, a square security cover is available. The cover is suitable for use on the RT SQ8 HD and its non-reinforced equivalent (RT SQ5). The cover is 100mm x 100mm.

Ornamental Locking Top - Suitable for use on the RT R8 HD telescopic bollard and its non reinforced equivalent (RT R5), the Ornamental Locking Top provides a traditional finish to the bollard, whilst providing the added security of a second locking mechanism. The cover features a diameter of 170mm.

The RSP VIC8 is a galvanised steel static post with an ornamental locking top and decorative surface trim plate around the bottom. The bollard is 710mm high and has surface diameter of 90mm. The RSP VIC8 is designed to coordinate with telescopic bollards specified with the ornamental locking top option.



RT KEY OP1 (FOLD DOWN) BOLLARD

The RT Key OP 1 steel bollard is 650mm high and has a 60mm diameter. Supplied powder coated in RAL Yellow 1021 as standard, the bollard can be folded down to temporarily allow vehicle access.

RTL 80 (LIFT OUT LOCKABLE) BOLLARD

The RTL 80 is a square lift out lockable bollard. Manufactured from galvanised steel, the bollard is 960mm high and 80 x 80mm wide.

About Us

All in One Security Products specialise in the physical security requirements and needs of both commercial and domestic clients. We work for a number of well known companies, as well as NHS Trusts, Local Government organisations and leading insurance companies. View More


Contact Us
0118 972 4077